發問時間: 社會與文化語言 · 1 0 年前

翻譯~~關於論文摘要..麻煩各位了

精密鑄造陶殼模面漿由於其主成分鋯粉顆粒大小為300mesh,極為細小不易與矽膠液黏結劑充分混合而溼潤,且攪拌過程控制變數多,因而影響面漿品質穩定性。本研究藉由量測面漿黏度、pH值及溫度變化來探討三種常用面漿攪拌方式:自轉桶攪拌、螺旋槳攪拌及滾筒攪拌的混合效益,以尋求最佳及最穩定之面漿攪拌方式。

研究結果顯示:自轉桶攪拌約6hr可達到穩定黏度值,唯黏度不易達到所設定的目標值。螺旋槳攪拌約8hr可達到穩定黏度值,唯穩定值一致性不易。滾筒攪拌約16hr可達黏度設定值,雖時間較長,然黏度穩定狀態一致性最佳。

專業名詞:

自轉桶攪拌(rotating tank type mixer)

螺旋槳攪拌(propeller type mixer)

滾筒攪拌 (drum roller type mixer)

黏度 (viscosity)

精密鑄造 (Investment Casting )

陶殼模 (Ceramic Shell Mold)

矽膠液 (Colloidal Silica)

面漿 (primary slurry)

鋯粉 (Zircon Flour )

=============================================================

麻煩各位高手們..有你們的幫助..一輩子感謝

1 個解答

評分
  • 1 0 年前
    最佳解答

    Dr.eye: Accurate to cast pottery shell thick liquid because main composition zirconium powder particle their size 300mesh the mould, extremely tiny to cohere pharmaceutical mix moist, mix course control more than parameter fully with silica gel liquid while being difficult, therefore influence surface thick liquid and quality stability.

    Dr.eye: Whether research this examine by quantity surface thick liquid viscosity, pH value and temperature change is it probe into 3 daily of thick liquid mix the way to come. Dr.eye: Rotation barrel mix, screw mix and benefit of mixing that cylinder mix, by way of seeking the best and most steady surface thick liquid to mix.

    Dr.eye: The result of study shows: Rotation barrel is it invite 6hr can is it stabilize viscosity value to reach to mix, only viscosity difficult goal value set up to reach.

    Dr.eye: The screw is mixed to invite 8hr to reach and stabilize viscosity value, only stabilizing value consistency is difficult.

    Dr.eye: The cylinder is mixed to invite 16hr to reach the viscosity setting up value, although time is relatively long, the viscosity stable state has the best consistency.

    Dr.eye: Specialized noun: The rotation barrel mixing (rotating tank type mixer) The screw mixing (propeller type mixer) The cylinder mixing (drum roller type mixer) Viscosity (viscosity) Cast accurately (Investment Casting ) Shell mould of the pottery (Ceramic Shell Mold) Silica gel liquid (Colloidal Silica) A piece of thick liquid (primary slurry) Zirconium powder (Zircon Flour )

    參考資料: Dr.eye:
    • 登入以對解答發表意見
還有問題?馬上發問,尋求解答。