Rony 發問時間： 社會與文化語言 · 1 0 年前

# 這題自動控制的英翻中...(急)20點!!!!!

Design PID controller for the system as follow figure to reduce the setting time by a factor of 4 while continuing to operate the system with 20% overshoot

89第五題

Design PID controller for the system as follow figure to reduce the setting

time by a factor of 4 while continuing to operate the system with 20%

overshoot

http://lib.ntust.edu.tw/tpaper/pdf/m891502.pdf

2 個已更新項目:

93第一題(B)

Deisgn a casecade lag compensator to improve the steadt-state error by a

factor of 20 by adding an open-loop pole at(-0.01)

http://lib.ntust.edu.tw/tpaper/pdf/m930405.pdf

3 個已更新項目:

### 2 個解答

• 1 0 年前
最佳解答

Design PID controller for the system as follow figure to reduce the setting time by a factor of 4 while continuing to operate the system with 20% overshoot

設計如下圖此系統的程式隔離控制器結構圖(PID, program isolation diagram)藉由降低4個仍然以20%的超越量繼續操作因素的設定時間.

89第五題

Design PID controller for the system as follow figure to reduce the setting

time by a factor of 4 while continuing to operate the system with 20%

overshoot

設計如下圖的程式隔離控制器結構圖減低這個藉由4個仍然以20%超越量操作系統因素的設定時間.

93第一題(B)

Deisgn a casecade lag compensator to improve the steadt-state error by a

factor of 20 by adding an open-loop pole at(-0.01)

藉由一個20的因素增加一個在(-0.01)的開放迴路電極

設計一個串聯衰退補償器來改善替代-狀態錯誤

請問一下 by a factor of 是按比率縮減還是什麼嗎? 要怎麼做呢?

藉由一個20的因素增加一個在(-0.01)的開放迴路電極

參考資料： 我已經盡力翻了 有一些字好像打錯了
• 迴圈
Lv 6
1 0 年前

依下列圖形為系統設計PD控制器,在放大倍數為4的條件下減少設定時間,

使系統能在20%過激的情況下連續操作.

overshoot.....過激.

系統,電路的動作或輸出,短時間超出設定值的現象.

by a factor of 20......放大倍數20.