薇薇 發問時間: 社會與文化語言 · 1 0 年前

PRO_E 3.0 m20 安裝說明翻譯 20點

有安裝過的人,麻煩請幫我翻譯一下,謝謝~

1.Use the Keygen.exe to generate your PTC HOST_ID license file;

2.Install the PTC License Server with your PTC HOST_ID license file which you got from Step 1;

3.Install Pro/ENGINEER, and select Single Server license type as the Pro/ENGINEER license;

then fill "your computer name" as the HOSTNAME in the BLANK before the port "7788".

*If you click the Setup Option" VERICUT (R) for Pro/ENGINEER" when you install Pro/ENGINEER and wanna the VERICUT as the

*embedded software for pro/e, you should also do the following two steps for the embedded VERICUT:

* A. Copy the patched CGtech.dll into the installed directory \proeWildfire 3.0\i486_nt\obj to replace the original one.

* B. Find the following file in the installed directory \proeWildfire 3.0\bin\proev.bat and open it with an Editor software,

* search

* Vericut %argstr%

* and replace it with the following string:

* Vericut %argstr% PTC_KEY=0

* then save the file. the purpose of the step B. is to forbid the VERICUT to use the PTC lic as its lic.Actually, CGtech

* no longer supports its VERICUT as an embedded software for pro/e and no longer uses PTC lic.FYI, See the CGtech official

* website said:

* http://www.cgtech.com/ptc_update/index.htm

4.Install Pro/Mechanica(Structural and Thermal Simulation) like Step 3.

5.Install PTC Distributed Services.this step will automatically get the lic from the lic server installed at step 2.

6.That is all and enjoy it!

2 個解答

評分
  • 1 0 年前
    最佳解答

    使用Keygen.exe 引起您的PTC HOST_ID 執照文件; 安裝PTC

    執照伺服器與您得到從步驟1 的您的PTC HOST_ID 執照文件; 安裝Pro/ENGINEER, 和選擇唯一伺服器執照類型如同Pro/ENGINEER 執照; 然後填裝"您的電腦名稱" 作為HOSTNAME 在空白在口岸"7788 之前" 。

    * 如果您點擊設定選擇"VERICUT (r) 為Pro/ENGINEER" 當您安裝Pro/ENGINEER 和要對VERICUT 作為* 嵌入軟體為pro/e, 您應該並且做以下二步為嵌入VERICUT: * A. 複製被修補的CGtech.dll 入安裝的目錄\proeWildfire 3.0\i486_nt\obj 替換原始一個。* B. 發現以下文件在安裝的目錄\proeWildfire 3.0\bin\proev.bat 和打開它以編輯軟體, * 查尋* Vericut %argstr%

    * 和用以下串替換它: * Vericut %argstr% PTC_KEY=0

    * 之外文件步B. 的目的然後將禁止VERICUT 使用PTC

    lic 作為它的lic.Actually, CGtech

    * 不再支持它的VERICUT 如同嵌入軟體為pro/e 和不再使用PTC lic.FYI, 看見CGtech 官員* 網站說: * http://www.cgtech.com/ptc_update/index.htm

    安裝Pro/Mechanica(Structural 和熱量模仿) 像步驟3

    。安裝PTC 分佈的Services.this 步自動地將得到lic 從lic 伺服器被安裝在步驟2 。那是全部和享用它!

    參考資料: 字典
  • 大師
    Lv 6
    1 0 年前

    1.Use Keygen.exe 引起您的PTC HOST_ID 執照文件;

    2.Install PTC 執照伺服器與您得到從步驟1 的您的PTC HOST_ID 執照文件;

    3.Install Pro/ENGINEER, 和選擇唯一伺服器執照類型如同Pro/ENGINEER 執照; 然後填裝"您的電腦名稱" 作為HOSTNAME 在空白在口岸"7788 之前" 。 * 如果您點擊設定選擇"VERICUT (r) 為Pro/ENGINEER" 當您安裝Pro/ENGINEER 和要對VERICUT 作為* 嵌入軟體為pro/e, 您應該並且做以下二步為嵌入VERICUT: * A. 複製被修補的CGtech.dll 入安裝的目錄\proeWildfire 3.0\i486_nt\obj 替換原始一個。* B. 發現以下文件在安裝的目錄\proeWildfire 3.0\bin\proev.bat 和打開它以編輯軟體, * 查尋* Vericut %argstr% * 和用以下串替換它: * Vericut %argstr% PTC_KEY=0 * 之外文件步B. 的目的然後將禁止VERICUT 使用PTC lic 作為它的lic.Actually, CGtech * 不再支持它的VERICUT 如同嵌入軟體為pro/e 和不再使用PTC lic.FYI, 看見CGtech 官員* 網站說: * http://www.cgtech.com/ptc_update/index.htm

    4.Install Pro/Mechanica(Structural 和熱量模仿) 像步驟3 。5.Install PTC 分佈的Services.this 步自動地將得到lic 從lic 伺服器被安裝在步驟2 。

    6.That 是全部和享用它!

還有問題?馬上發問,尋求解答。