匿名使用者
匿名使用者 發問時間: 商業與財經工作與就業其他:工作與就業 · 1 0 年前

關於生管的”control plan”為何

面試生管助理的時候主考官要求做個"control plan"給他,有人可以幫忙解釋一下 control plan 包含的內容是什麼?用途為何?需要注意的細節? 有沒有範例或者書籍可參考

2 個解答

評分
  • ?
    Lv 4
    1 0 年前
    最佳解答

    Control plan

    --description of the systems and processes required for controlling product

    ●A.1 Phases of the control plan

    The control plan shall cover three distinct phases as appropriate.

     a) Prototype: a description of the dimensional measurements, material and performance tests that will occur during building of the prototype. The organization shall have a prototype control plan if required by the customer.

     b) Pre-launch: a description of the dimensional measurements, material and performance tests that occur after prototype and before full production. Pre-launch is defined as a production phase in the process of product realization which may be required after prototype build.

     c) Production: documentation of product/process characteristics, process controls, tests and measurement systems that occur during mass production.

    Each part shall have a control plan but, in many cases, family control plans may cover a number of similar parts produced using a common process. Control plans are an output of the quality plan.

    2008-08-20 09:51:48 補充:

    ●A.2 Elements of the control plan

    The organization shall develop a control plan that includes, as a minimum, the following contents.

    2008-08-20 09:52:39 補充:

     a) General data

     − control plan number,

     − issue date, and revision date, if any,

     − customer information (see customer requirements),

     − organization's name/site designation,

     − part number(s),

     − part name/description,

     − engineering change level,

     − phase covered (prototype, pre-launch, production),

    2008-08-20 09:52:51 補充:

     − key contact,

     − part/process step number,

     − process name/operation description.

     b) Product control

     − product-related special characteristics,

     − other characteristics for control (number, product or process),

     − specification/tolerance.

    2008-08-20 09:53:06 補充:

     c) Process control

     − process parameters,

     − process-related special characteristics,

     − machines, jigs, fixtures, tools for manufacturing.

     d) Methods

     − evaluation measurement technique,

     − error-proofing,

     − sample size and frequency,

     − control method.

    2008-08-20 09:53:14 補充:

     e) Reaction plan and corrective actions

     − reaction plan (include or reference),

     − corrective action.

    2008-08-20 10:17:24 補充:

    Control Plan--控制計畫,我以中文再說明

    Control Plan描述生產過程的每個階段所需的控制措施,包括保證所有的過程輸出將處於控制狀態的進貨、加工、出廠和階段性的要求。

    在正式生產運行當中,控制計畫提供了用來控制特性的過程監測和控制方法,由於期望過程是不斷更新和改進的,因此控制計畫反映了與這種過程的改變狀況相對應的控制方式

    2008-08-20 10:17:45 補充:

    為了達到程序控制和改進的有效性,應對過程有一個基本的瞭解。為了達到對過程更好的瞭解,每一流程應有一個專業的人員/小組,利用所有可用的資訊來制定控制計畫,這些資訊包括:

    –過程流程圖

    –系統/設計/過程失效模式及後果分析

    –特殊特殊

    –從相似零件得到的經驗

    –設計評審

    –最優化方法(QFD,DOE)

    2008-08-20 10:30:42 補充:

    通常一般公司都是RD主導,然後把工程 (有些公司是工程主導)、採購、生管、品保、製造拉進來一起訂定;可分為APQP、Mass Product 在其中訂定...

    為什麼要訂定,因為在QS-9000與TS-16949(新)都有要求,若你要做生意,一定要依照她的要求做,否則客戶一稽核就掛點

    說了這麼多,生管在這之中,占的比重較少,只是確保材料、參數、檢驗、流程...有沒有明確定義在路單 (生產中,印製一張紙,所有生產中的流程定義其中,可藉由刷 bar code 將相關資訊傳回系統...)

    2008-08-20 10:31:01 補充:

    ============================

    要找實際例子,你要向朋友拿喔,或是找QS-9000與TS-16949相關書籍,

    我手上有,但都是各家企業的機密無法提供,Sorry !

    參考資料: , 企業顧問
  • 4 年前

    RD主導??怎看起來是跟component方面的Q有關的事,RD在設計方面的effort已經夠大了,怎還有辦法做這方面的事............

還有問題?馬上發問,尋求解答。