匿名使用者
匿名使用者 發問時間: 社會與文化語言 · 10 年前

專業工程英文(文長~給15點)

All modules with lighting shall have electrical installations internally connected and be match-terminated with a switch that is common to the entire unit and which is connected by the supplier.Unit components with drainage troughs shall be made of stainless material and have a drain connection on the side. Connections to the floor drains are included in the delivery.Filter cabinets shall be equipped with clean filters at the final inspection and one set of extra filters. All filter cabinets shall be equipped with differential pressure meters of type Magnehelic or equal, marked with initial and final pressure gradients. Supply & Return air fans are tested and balanced to the AF&ID design. AF&ID design evaluates the room particle impact to set air change rates to minimize the introduction, generation and retention of air borne particles.Automation package shall be Direct Digital Control (DDC) or microprocessor-based controller implemented with Graphical Software via OIT. Start-up, shutdown, fully automation of the unit, edition of specific operation functions must be included on the system. The screen must allow operator to configure system for either operation or stop modes, and all control parameters must be monitored. To avoid losing of control program and operating data when power failure, the controller-related system backup as well as UPS for data and process recovery shall be installed.The Supplier shall utilize controller, which shall include a communications port. The Supplier shall provide documentation and utilizing Siemens program development and documentation software.Self-explanatory menus and sub-menus facilitate use of the machine, permitting easy monitoring of process, AHU choice and effective management of all parameters and failure and alarm handling.- Modem connection for trouble shooting and software modifications.Complete validation services by trained specialists (as an option).. 文較長~給15點喔(不要翻譯軟體)

1 個解答

評分
  • 10 年前
    最佳解答

    所有模塊與照明電器裝置應具有內部連接,並匹配終止一個開關,常見的是整個單位,這是連接的供應商。

    單位分量的排水槽應採用不銹鋼材料,並有排水連接旁邊。連接到地面排水渠中包括交付。

    過濾櫃應配備清潔過濾器在最後一組檢查和額外的過濾器。所有過濾器櫃應配備差壓米型Magnehelic或等於標有初始和最終壓力梯度。

    供應及回風風機測試和平衡,自動對焦和ID設計。 AF和ID設計粒子的影響評估室設置變化率,以減少空氣的引進,產生和滯留空氣傳播的微粒。

    自動化包裝上就直接數字控制(DDC)或微處理器為基礎的控制器實現與圖形軟件通過 OIT的。啟動,關機,完全自動化的單位,編輯功能的具體操作必須包含在系統上。屏幕必須配置系統允許運營商對於任何操作或停止模式,所有控制參數必須進行監測。為了避免失去控制程序和操作數據時斷電,控制器相關的系統備份以及UPS的數據和過程的恢復,應安裝。

    供應商應利用控制器,它應包括一個通信端口。供應商應利用西門子提供的文件和程序開發和文檔的軟件。

    自解釋菜單和子菜單方便使用的機器,允許簡單的監控過程,空氣處理機組選擇和有效管理的所有參數和故障和報警處理。

    - 調製解調器連接故障排除和修改軟件。

    完整的驗證服務,由受過訓練的專家(作為一個選項)。

    聆聽以拼音方式閱讀字典 - 檢視詳細字典

    • Commenter avatar登入以對解答發表意見
還有問題?馬上發問,尋求解答。