Aa Aa 發問時間: 社會與文化語言 · 8 年前

請專家幫我翻譯一下 但請不要用翻譯程式

MS-136W and MS-145W can be used as a release agent to mold rubbers and plastics.

When applying the release agent, the mold temperature must be hotter than 212oF (100oC).

One application typically provides 5 to 10 releases.

When the coating is fused, more releases are typical.

The transfer of PTFE to molded parts is negligible, minimizing interference with post finishing operations.

1 個解答

評分
  • 8 年前
    最佳解答

    MS-136W and MS-145W can be used as a release agent to mold rubbers and plastics.

    MS-136W和 MS-145W都可用來當橡膠和塑膠射出產品的脫模劑

    When applying the release agent, the mold temperature must be hotter than 212oF (100oC).

    使用脫模劑時,模具的溫度必須高於華氏212度(攝氏一百度)

    One application typically provides 5 to 10 releases.

    塗上一次(脫模劑) 通常可以脫模五至十次

    When the coating is fused, more releases are typical.

    當表面塗層熔化後,可以多脫模幾次是其特色

    The transfer of PTFE to molded parts is negligible, minimizing interference with post finishing operations.

    不必再對脫模後的零件使用鐵弗龍,使得脫模後的工序省事不少。

還有問題?馬上發問,尋求解答。