有人知道優盛電子血壓計 錯誤碼EE是甚麼意思嗎?還有公司維修部門的電話?

1 個解答

評分
  • 4 年前
    最佳解答

    EE / Measurement Error: Make sure the L-plug is securely connected to the

    air socket and measure again. Wrap the cuff correctly and keep arm steady

    during measurement. If the error keeps occurring, return the device to your

    local distributor or service center.

    E1 / Air Circuit Abnormality: Make sure the L-Plug is securely connected

    to the air socket on the side of the unit and measure again. Another possible

    cause can be due to the short circuit of the microphone embedded in the

    cuff. If the errors still occur, return the device to your local distributor or

    service center for help.

    E2 / Pressure Exceeding 300 mmHg: Switch the unit off and measure

    again. If the error keeps occurring, return the device to your local distributor

    or service center.

    E3 / Data Error: Remove the batteries, wait for 60 seconds, and reload. If

    the error keeps occurring, return the device to your local distributor or service

    center.

    Er / Exceeding Measurement Range: Measure again. If the error keeps

    occurring, return the device to your local distributor or service center.

    No display when the START/STOP key is pressed: Re-insert the batteries

    in the correct positions.

    Note: If the unit still does not work, return it to your dealer. Under no circumstance

    should you disassemble and repair the unit by yourself.

    Rossmax International Ltd

    12F, No. 189, Kang Chien Road

    Taipei, 114

    Taiwan

    Tel: +886 2 2659 7888

    Fax: +886 2 2659 7666

    E-Mail: emea@rossmax.com

    • 解答的人寫的是英文,我看不懂呀!但還是謝謝他....

    • 登入以對解答發表意見
還有問題?馬上發問,尋求解答。